|
ECLIPSE Ti2-E/Ti2-E/B*1 |
ECLIPSE Ti2-A |
ECLIPSE Ti2-U |
Optical system |
Infinity-corrected CFI60 |
Field number*2 |
22 with C-mount, 25 with F-mount |
Intermediate Magnification switching |
Manual switching of 1.0x/1.5x (exchangeable from 1.5x to 2.0x) |
Status detection |
- |
Bertrand lens |
Manual in/out, and manual focus, Status detection |
- |
Output port |
4 Motorized positions
Eyepiece 100%, left 100%, right 100%, eyepiece 20%/left 80%
(Ti2-E/B: bottom 100%) |
4 Manual positions
Eyepiece 100%, left 100%, right 100%, option (to eyepiece
20%/left 80% or eyepiece 20%/right 80%) |
Can add ports by use of back port unit and/or choice of tube base unit*3 |
Focusing unit |
Motorized drive, Coarse/fine focus changeover, 10mm stroke, Minimum increments: 0.01μm, 0.02μm (with encoder control) |
Manual drive, Coarse/fine focusing knob, 10mm stroke |
Stage up |
Available*4 |
Binocular tube |
Binocular S tube TC-T-TS (field number 22), Ergonomic ER tube TC-T-ER (field number 22) |
Motorized eyepiece tube base unit for external PH (TI2-T-BP-E) |
Camera port (field number 16), Motorized PH turret with 4 motorized positions |
- |
Assist eyepiece tube base unit (TI2-T-BA) |
Assist camera (field number 22), Status detection |
- |
Eyepiece tube base unit with port (TI2-T-BC) |
Camera port (field number 16) |
- |
Camera port (field number 16) |
Pillar for transmitted illumination (TI2-D-PD) |
Condenser vertical stroke: 66mm, Backward tilting up to 25 degrees, With field diagram and refocusing mechanism 2 filter slot positions (4 filter position option is also available with Filter Slider for transmitted illumination (TI2-D-SF)) |
LED Lamphouse for dia illumination (TI2-D-LHLED) |
High power LED |
Precentered Lamphouse (D-LH/LC) |
00W halogen bulb (pre-centered) |
Motorized condenser turret (TI2-C-TC-E) |
7 motorized positions (ø37mm x4, ø39mm x3), LWD/ELWD/CLWD/NAMC condenser lenses are supported |
- |
Intelligent condenser turret (TI2-C-TC-I) |
7 manual positions (ø37mm x4, ø39mm x3), Status detection, LWD/ELWD/CLWD/NAMC condenser lenses are supported |
- |
Condenser turret (TC-C-TC) |
7 manual positions (ø37mm x4, ø39mm x3), LWD/ELWD/CLWD/NAMC condenser lenses are supported |
ELWD-S condenser turret (TE-C) |
4 manual positions, With ELWD condenser lens (NA0.3/O.D.=65) |
HNA condenser slider (TI2-C-SCH) |
2 manual positions (ø37mm x1, ø39mm x1), HNA dry lens/HNA oil lens are supported |
Condenser lens |
LWD (O.D.=30mm, NA=0.52), ELWD (O.D.=75mm, NA=0.29), CLWD (O.D.=13mm, NA=0.72), HNA dry (O.D.=5mm, NA=0.85), HNA oil (O.D.=2mm, NA=1.4), NAMC (O.D.=44mm, NA=0.4) |
Motorized stage (TI2-S-SE-E, TI2-S-SS-E) |
Stroke X: ±57mm, Stroke Y: ±36.5mm, Max drive speed: approx. 25mm/sec, Magnetic sample holder |
- |
Stage (TC-S-SR, TC-S-SRF) |
Stroke X: ±57mm, Stroke Y: ±36.5mm, Adjustable stroke range (3 levels) with adjusting pin, Long/middle/short handle options available |
Gliding stage (TC-S-GS) |
Stroke ø20mm |
Perfect Focus Unit with motorized nosepiece for Auto Correction Collar (TI2-N-NDA-P) |
5 motorized positions, Simple waterproof structure |
- |
Motorized DIC sextuple nosepiece (TI2-N-ND-E)
Perfect Focus Unit with motorized nosepiece (TI2-N-ND-P)
Perfect Focus Unit with motorized nosepiece for MP (TI2-N-NDM-P) |
6 motorized positions, Simple waterproof structure |
- |
Intelligent DIC sextuple nosepiece (TI2-N-ND-I) |
6 manual positions, Status detection, Simple waterproof structure |
- |
Sextuple nosepiece (TI2-N-N), DIC sextuple nosepiece (TI2-N-ND) |
6 manual positions, Simple waterproof structure |
Motorized epi filter turret (TI2-F-FLT-E, TI2-F-FLTH-E) |
6 motorized positions, Motorized shutter |
- |
Intelligent epi filter turret (TI2-F-FLT-I) |
6 manual positions, Manual shutter, Status detection*5 |
Motorized BA filter wheel (TI2-P-FWB-E) |
7 motorized positions, High speed mode: 50ms, Low vibration mode: 100ms (movement time between adjacent positions) |
- |
Motorized shutter (NI-SH-E)*6 |
12ms to open/close |
EPI-FL module (TI2-LA-FL), EPI-FL module for large FOV (TI2-LA-FLL) |
Supports fiber illuminator; includes 2-position filter slider and aperture diaphragm |
Simple EPI-FL attachment (TI2-F-FLS) |
Supports both fiber illuminator and lamp house; includes 3-position filter slider |
Field stop slider |
Circular (TI2-F-FSC), rectangular (TI2-F-FSR), square (TI2-F-FSS) aperture options |
Controller, display device |
Stage joystick (TI2-S-JS-SS), Tablet |
Tablet |
- |
Controller for TI2-E (TI2-CTRE) |
USB/LAN interface, I/O function |
- |
Temperature: 0℃+40℃, Humidity: 60% RH max. (at +40℃, no condensation), Indoor use only |
Motorized accessories have a status detection function
*1 Motorized model with a bottom port
*2 Limitations apply based on objective and filter cube choice, stage-up configuration, and illumination module, etc.
*3 Tube base units with a port cannot be used with Ti2-A
*4 Stage up kit is required. Please contact Nikon.
*5 Status detection cannot be used when attached to the Ti2-U
*6 NI-SH-CON Controller for Motorized Shutter is required for use with the Ti2-A/Ti2-U
|